Appendix Close the chassis and switch on the power supply unit or plug in the power cord. Kn9 ultra , Kn9s. The auto-run screen will appear, click the. Connects to the Power Switch cable of chassis front panel. If not, browse the.

Uploader: Goltikasa
Date Added: 17 February 2005
File Size: 26.83 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 38741
Price: Free* [*Free Regsitration Required]

ABIT KN9 SLI, AM2+, AMD Motherboard

The BIOS setup screens and neywork illustrated in this manual are for your reference only, and may not completely match with what you see on your screen.

To connect SATA device: Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly. To read the user’s. Fan Power Connectors These connectors each provide power to the cooling fans installed in your system.

Table of Contents Add to my manuals Add. The red line on the ribbon cable must be aligned with pin-1 on both the IDE port and the hard-drive connector. Press the power-on button to boot up system.

The heatsink for CPU may have thermal interface material attached bottom. Type in the model name and revision number of your motherboard. Table Of Contents 2. If not, applying a few squeeze of slu paste to the Ahit die will help to increase the contact. After the board has been positioned, check to make sure everything is OK before putting the chassis back on. Secure the SLI bracket and the graphics cards to the chassis with screws.


Got it, continue to print. Enter text from picture: Click to enter the sll installation menu. Technical Support Form Si name: Save and exit the BIOS setup menu. This user’s manual contains all the information you may. Page 22 DIMM module. Kn9 ultraKn9s. Usually there is no hardware or BIOS setup requires after adding or removing memory modules, but you will have to clear the CMOS memory first if any memory module related problem occurs.

By pressing ‘print’ button you will print only current page.

Connects to USB devices such as scanner, digital speakers, monitor, mouse, keyboard, hub, digital camera, joystick etc. Connects to the Power Switch cable of chassis front panel.


After you had gone through the troubleshooting procedures, yet the problem still exists, or you find an evident damage on the motherboard. You can find it on the screen during the POST sequence. DO NOT place jumper caps on these connectors.


If the situation remains the same, networm Step 3.

ABIT KN9 SLI – motherboard – ATX – Socket AM2 – nForce 570 SLI

Click on this tab to enter the menu for installing utilities exclusively developed by Zli. Close the chassis and switch on the power supply unit or plug in the power cord. The system will not start without connecting power to this one.

This manual also for: Don’t have an account? If not, browse the. Type in the BIOS version of your motherboard.