ASUS P4P800 E DELUXE SATA RAID DRIVER

Such opinions may not be accurate and they are to be used at your own risk. The conclusion of the expert in the old post was that the drives were dead. Pressing Ctrl-F any way does not get you in either. The Promise controller is the Fastrak controller. The settings for RAID for the built into the main chipset drive controller are in the mboard’s bios Setup. I would backup and restore to an external drive to keep the data.

Uploader: Tugor
Date Added: 23 August 2011
File Size: 17.79 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 46345
Price: Free* [*Free Regsitration Required]

Use Question Asis such as ” Why? Net cannot verify the validity of the statements made on this site. I doubt the message no bios installed is correct for diag use.

To do this I have to use the Promise Fast Track Bios utillity to delete my existing array and create a new one. The old post was: There’s no need to load the Fastrak’s bios if no drives are detected connected to the controller. The Promise controller is the Fastrak controller. You should have seen a hot key sequence before this or maybe after that says something to enter raid config.

Standard SATA Operation on RAID Controller? (Asus P4PE Deluxe) – Ars Technica OpenForum

The information on Computing. If the Promise Fastrak controller is enabled in the mboard’s bios settings it probably is by defaultwhen you boot the computer you always see this first: Seluxe is WinXP see’s the array and all the data is there and it works fine. P4PE Deluxe home support page http: Net is the opinions of its users.

  AU31 AUDIO DRIVER

Is the Fasttrack Bios part of the Asus Bios or is it updated by another means? A Pit Bull is like a gun you can pet.

And there is no safety on it. The conclusion of the expert in the old post was that the drives were dead.

Yes No I don’t have a dog. Net and its accuracy. The issue is either you didn’t use the setup utility to assign drives or raid or there is an issue with the drives physically or electrically in it’s attachment to the raid array. But when I boot the machine I see the same situation as the old post. Support for accessing the Fastrak’s bios’s RAID configuration utility is built into the mboard’s bios version.

Thus the bios can “see” the drives. I would backup and restore to an external drive to keep the data. Would you use Snapchat filters on your dog?

ASUS P4PE DeluxeSATA II??? – TechSpot Forums

What else could I try? Over a Month Ago Time Zone: Such opinions may not be accurate and they are to be used at your own risk.

  LNE100TX VISTA 64-BIT DRIVER DOWNLOAD

If you don’t respond to that within x 5? If you want the operating system to be on the RAID array Pressing Ctrl-F any way does not get you in either.

Asus P4P800E Deluxe Intel Socket 478 Motherboard

Thousands of users waiting to help! If at least one o4p800 is detected connected to the Promise Fastrak controller and is are being detected correctly, you’ll see a line that indicates the drive s has have been detected, and if at least two drives or possibly at least one is are detected, then THAT’S when you’ll see the line that tells you what keys to press to access it’s RAID utility Ctrl-F in this case? I have tried re-installing the latest Asus bios using EZflash.

The settings for RAID for the built into the main chipset drive controller are in the mboard’s bios Setup.