Release the cables from the three clamps and disconnect the relay connector. This manual also for: Push the lever and remove the Paper Feed Roller. Page 8 Do not use vacuum cleaner for home use to clean up spills of Before performing repair and maintenance work, read and powdered toners. Physical offset can be configured.
|Date Added:||15 November 2010|
|File Size:||68.56 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Part Names Table Remove the gear from the Transfer Roller. Open the Front Cover.
Download Epson LP-S300N printer driver & Resettter
When attaching the Transfer Roller, push the release lever to lift its front end, and put the gear shaft under the front end of the lever. The value can be Horizontal Chapters Table Of Contents The paper which passed through the fuser unit turns lp-e300n the actuator exit sensor ll-s300n the fuser unit, and is led by the guide comprised of the rear cover, frame and the FD cover guide, finally reaching the upper FD roller.
Doing so can result in malfunction of 4.
Pull out the right shaft of the Rear Cover as seen from the rear using a flat-blade screwdriver or similar tool, and remove the Rear Cover. Areas of the printed image are missing. Attach the spring to the projection of the separation Roller holder.
Right cooling fan motor Cools the interior of machine. Remove the four screws. Flashes on and off at intervals of 0.
Lights Flashes on and off at intervals of 0. Specially-treated papers, such as carbon-backed, non-carbon, heat-sensitive, pressure-sensitive, or acid paper Board Diagram Connector No. Disengage the three hooks and remove the connector cover. Doing so may cause the safety functions to stop working properly, and may result in fire or injury. Print a status sheet, and check the current firmware version.
Make sure the Contact Pin is properly positioned. Setting of physical offset 2.
The underlined values are default values. Remove the Eraser Lamp from both left and right holders. Put the printer upside down. Oval shape End of the Shaft 1.
トナーマート / レーザープリンター各メーカーサポート情報掲載ページ
Page 8 Do not use vacuum cleaner for home use to clean up spills of Before performing repair eepson maintenance work, read and powdered toners. Cleaning Wipe the surface clean with a cloth wrung out of water. Do not use vacuum cleaner for home use to clean up spills of Before performing repair and maintenance work, read and powdered toners.
Disconnect the two connectors. When the Laser Scanner unit malfunctions, replace it with a new lp-w300n.
Release the cables from the Clamps. Pull out the bushing.
For Epson Lp S, For Epson Lp S Suppliers and Manufacturers at
Left cooling fan motor Cools the interior of machine. For lpp-s300n operational procedure, follow the instructions shown by the program. Remove the two screws, and remove the Top Cover.
Slightly open the Front Cover and disengage both sides of the cover from the MP Tray by bowing the Guide portions of the cover.